Amigurumi Penguin Rattle Making

Hello! Get Ready and permit the rattle get started!

Fabrics

Snowball Child One hand knitting threads
White (K010) colour thread
Blue (K576) color thread
Orange ( K256) color ip2.FIVE mm crochet rattle fiber Fiber Needle A Few black thread

Abbreviations

X: Needle

V: Building Up

A: Lower

*: Repeat depend is detailed.

Preparation

Penguin Head

Let’s no longer disregard to fill the fiber.

Let’s position a rattle right within the heart of the head. should you should not have a rattle, you’ll use the small yellow plastic container throughout the marvel eggs. Place a few beads in it and tape it neatly in order that it does not open. Then insert it into the penguin. this is how I made a few rattle toys.

Let’s start with a blue string.

1) 6x (6)

into the magic ring 2) Double loops on each loop 12x (12)

3) (1x, 1v) * 6 (18)

4) (2x, 1v) * 6 (24)

5) (3x, 1v) * 6 (30)

6) (4x, 1v) * 6 (36)

7) (5x, 1v) * 6 (42)

8) (6x, 1v) * 6 (FORTY EIGHT)

9-11) 48x

Blue and knit with white threads.

12) 18x with blue thread, 3x with white thread, 6x with blue thread, 3x with white thread, blue thread 18x (FORTY EIGHT)

13) 17x with blue rope, 5x with white rope, 4x with blue rope, 5x with white rope, 17x with blue rope (FORTY EIGHT)

14) 16x with blue thread, 6x with white thread, 4x with blue thread, 6x with white thread, 16x with blue thread (48 )

15) Blue colour 16x with rope, 6x with white rope, 4x with blue rope, 6x with white rope, 16x with blue rope (48)

16) With blue rope 16x, 16x with white thread, 16x with blue thread (FORTY EIGHT)

17-18) 48x

19) With blue thread (a, 6x) * 2, with white thread (a, 6x) * 2, with blue thread (a, 6x) * 2 (FORTY TWO)

20 ) With blue thread (a, 5x) * 2, with white thread (a, 5x) * 2, with blue thread (a, 5x) * 2 (36)

21) With blue thread (a, 4x) * 2, with white thread (a, 4x) * 2, with blue thread (a, 4x) * 2 (30)

22) With blue thread (a, 3x) * 2, with white thread (a, 3x) * 2, with white thread (a, 3x) * 2 (24 )

23) With blue thread (a, 2x) * 2, with white thread (a, 2x) * 2 with white thread (a, 2x) * 2 (18)

Head phase is over.

Let’s stitch the ends of the ring at the same time.

While the head section is finished permit’s sew it to the rattle part properly.

Toes

1) 6x (6)

2) Allow’s double sink into every slot. (12)

3) Let’s knit 3 more 12x rows. (12)

FOUR) (1x, 1v) * 6 (18)

5) Allow’s knit 18x ​​and draw 1 chain and close it up with a needle steadily.

Permit’s depart the rope lengthy. Permit’s sew to the bottom of the rattle ring.

Gaga

1) pull FOUR chains, make 2 frequent needles and three common needles within the closing slot, Permit’s make 1 needle to the adjacent, 2 needles to the end.

2) Let Us fill the needle incessantly with out 1 row increment. Let’s make EIGHT needles round and leave the rope lengthy. Allow’s sew the pinnacle section to the place within the image.

Here our penguin rattle is set!

 

i’m hoping you really liked it.

Source : orgumodelleri.com

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *